Getting Setup Without an Internet Connection

In this guide, we will show you how to setup your GoSwift Security Camera without an internet connection.


If you are one of the rare earthlings who doesn’t have an internet connection at the location in which you are installing your GoSwift product, do not fret! We got you covered. You will need a windows based PC to complete this step.

Go ahead and wire and power up your system as shown in the initial setup guide, then follow these instructions.


Sections in this guide

Install the Configuration Tool on your PC and open up the program.

  • Make sure your PC is on the same network as your GoSwift Products. The configuration tool can be found on the CD that came with your product or you can download the tool here:
    Download the Configuration Tool

  • Open the program. You should see your device shown:
    Setup Without Internet Connection

Setup Your Device

  • Click on the checkbox next to the IP address of your product.
  • Enter the username and password:
    • If you are logging into a DVR System, the default username and password:
      admin / admin789
    • If you are logging into an individual camera, the default username and password:
      admin / admin
  • Change the Net Mode to "Static" and click Modify.
    Setup Without Internet Connection